| UM1460 铣床 | |||
| 主铀孔锥度 | Spindle taper | 7:24 IS0 50(Horizontal/Vertical) | |
| 工作台尺寸 | Distance spindle to column surface | 1700X400 mm | |
| 工作台回转角度 | Worktable swivel angle | ±45° | |
| 工作台“T”型槽 | 槽数 | Number | 4 |
| 宽度 | T-slots of table width | 18mm | |
| 间距 | Distance | 100mm | |
| 主轴转速范围 | Spindle speeds range | 12steps 50-1520r.p.m(Vertical)12steps 60-1850r.p.m(Horizontal) | |
| 工作台行程 | X、(纵向) | Longitudinal | 1300 mm |
| Y、(横向) | Table travel Cross | 420 mm | |
| Z、(垂向) | Vertical | 600 mm | |
| 工作台X、Y向进给速度 | X.Y. axes feeding | 25-800 mm/min Rapid feeding 800 mm/min | |
| 工作台Z向进给速度 | Z axes feeding | 8-267 mm/min Rapid feeding 267 mm/min | |
| 主轴孔中心至工作台距离 Distance fromspindle centerto worktable | 床身卧铣 | main horizontal spindle | 0-440 mm |
| 铣头低卧 | milling head horizontal(low position) | 150-590 mm | |
| 铣头侧卧 | milling head horizontal(side position) | 340-780 mm | |
| 铣头高卧 | milling head horizontal(hish position) | 530-970 mm | |
| 主轴端面至工作台面距离 | Distance from spindle nose to worktable | 50-650 mm(Vertical) | |
| 主轴孔中心至床身导轨面距离 | Distance from Vertical spindle cente, to guideway surface | 0-1000 mm(Vertical maillingspindle head) | |
| 万能回转头水平面回转角度 | horizontal swivel angle of milling head | 360° | |
| 万能回转头垂直回转角度 | Vertical swivel angle of milling head | 360° | |
| 主传动电机功率 | Main motor | Vertical Milling 7.5KW(V) Horizontal Milling 5.5KW(H) | |
| 工作台机进给伺服电机功率 | Feeding motor | 2.36 KW 15N.M | |
| 冷却泵电机功率 | Coolant pump motor | 9OW | |
| 冷却泵流量 | Coolant pump flux | 25Litres/minute | |
| 机床外形尺寸 | Overall dimensions | 2300X2300X2270 mm | |
| 机床重量(约) | G.W | about 3600 kg | |
简体中文
English